Hardwood floors are one of the more desirable types of flooring to install. They are beautiful and easy to clean. However, installing hardwood flooring can be much more work than other types of flooring. The biggest problem is that they need to be properly prepared before laying the flooring. This article will give you the tips and techniques needed to install your new engineered hardwood flooring in the right way so that it looks good and lasts for years to come.

 

The first thing you need to do is prepare the sub-floor. This consists of old solid hardwood that was either damaged or removed from your original house. You can either search for a professional company that specializes in preparing these floors or you can get the information from the manufacturers. You must remove as much board as possible so that when you lay your new flooring it will be level. You should also compact any large pieces of solid waste into smaller spaces by using a sander. Find out about the floor refinishing Toronto now.

 

Once the sub-floor has been prepared, it's time to take the next step. This is usually called the main flooring. The first part of the hardwood flooring usually consists of planks of wood that have been cut to fit together. These pieces are then covered with a type of veneer that matches the design of the rest of the flooring.

 

Most hardwood flooring comes pre-finished. If your hardwood flooring still has some work to be done then you will need to apply a type of stain. If you are refinishing an existing room then you can just leave it the way it is. Hardwood floors are best left in their original state because you can just sand them down and reapply the stain if necessary. If you are doing a completely new room then the more popular choice is to install the hardwood flooring as-is. This will save you the extra steps of sanding and applying the stain.

 

After the sub-floor has been taken care of it's time to move on to the main floor. This is the part that you can see. There are generally three things to keep in mind when placing hardwood flooring down first. First, always remember that lighter is always better. It's a well-known fact that the heavier a floor is the more likely it is to creak, buckle and show signs of wear.

 

Never place the hardwood under any load. For example, it's best not to use heavy books on top of solid hardwood boards because it can cause damage to the polished finish. Most hardwood flooring instructions also recommend that you avoid putting drywall or painted wallpaper directly on top of the boards as it can cause scratches that will show up later.  This post: https://www.ehow.com/how_6232891_way-install-hardwood-floors.html will help you to understand the topic even better.